Blue Wind bilge tank refit
1. Removal of old stainless bilge water tank (in one piece!) and same made anew out of double weld 1/8" steel
2. Clean and repaint bilges
3. Apply non rot pad stands ( not wood!)
4. Paint rough surface with steel primer and bilge paint
5. Put fittings in

Do not forget to lower racors in the bilges and note that this system will work without adding an auxiliary fuel pump.
That's all!
-- 
T37 # 385 "Blue Wind"
Skipper Alexandra 
skipper.alexandra@gmail.com
200 Tons Yacht Captain/ Divemaster
English/French/Italian/Spanish/German